Introduction
Hey readers,
Are you tired of your old, leaky toilet? Ready to upgrade to a new American Standard Champion toilet? Well, you’re in the right place! In this comprehensive guide, we’ll walk you through every step of the installation process, from start to finish. Whether you’re a seasoned DIYer or a complete novice, we’ve got you covered. So grab your tools and let’s get started on installing your new American Standard Champion toilet!
Choosing the Right Toilet
Before you start installing your new toilet, you need to make sure you choose the right one for your bathroom. Here are a few things to consider:
-
Toilet Height: Toilets come in two standard heights: 14 inches and 16 inches. The 14-inch height is suitable for most people, but the 16-inch height is better for taller individuals or those with limited mobility.
-
Toilet Shape: Toilets come in two basic shapes: round and elongated. Round toilets are more compact, while elongated toilets offer more comfort.
-
Toilet Flush Type: There are two main types of toilet flushes: gravity flushes and pressure-assisted flushes. Gravity flushes are more common and less expensive, while pressure-assisted flushes are more powerful and efficient.
Step-by-Step Installation Guide
Now that you’ve chosen the perfect toilet, it’s time to install it. Here’s a step-by-step guide to help you through the process:
1. Turn Off the Water Supply
The first step is to turn off the water supply to the toilet. Locate the water supply valve behind the toilet and turn it clockwise to close it.
2. Drain the Toilet
Once the water supply is turned off, flush the toilet to drain it. You may need to hold down the flush handle to release all of the water.
3. Disconnect the Water Supply Line
Locate the water supply line that is connected to the toilet and disconnect it. You may need a wrench to loosen the connection.
4. Remove the Old Toilet
Once the water supply line is disconnected, you can remove the old toilet. Carefully lift the toilet straight up and off of the floor. Be careful not to damage the floor or the toilet.
5. Clean the Toilet Flange
The toilet flange is the part of the floor that the toilet bolts into. Before installing the new toilet, clean the toilet flange with a wire brush to remove any debris or old wax.
6. Install the Wax Ring
Place a new wax ring on the toilet flange. Make sure the wax ring is properly aligned and seated.
7. Set the Toilet in Place
Carefully set the toilet bowl on top of the wax ring. Make sure the toilet is aligned properly and that the base of the toilet is flush with the floor.
8. Bolt the Toilet Down
Locate the two toilet bolts and insert them through the holes in the base of the toilet. Tighten the bolts until the toilet is secure. Do not overtighten the bolts, as this could crack the toilet bowl.
9. Reconnect the Water Supply Line
Reconnect the water supply line to the
FAQ about American Standard Two Piece Champion Toilet Install Manual
What tools do I need to install the Champion toilet?
- Adjustable wrench
- Hacksaw or tubing cutter
- Tape measure
- Level
What is the rough-in dimension for the toilet?
- 12 inches
How do I connect the water supply line?
- Cut the water supply line to the desired length.
- Connect the water supply line to the fill valve.
- Turn on the water supply and check for leaks.
How do I install the toilet bowl?
- Place the toilet bowl on the flange.
- Insert the bolts through the holes in the base of the toilet bowl.
- Tighten the nuts on the bolts until the toilet bowl is secure.
How do I install the toilet tank?
- Place the toilet tank on the toilet bowl.
- Insert the bolts through the holes in the tank.
- Tighten the nuts on the bolts until the tank is secure.
How do I connect the flush valve?
- Connect the flush valve to the fill valve.
- Turn on the water supply and check for leaks.
How do I adjust the water level in the tank?
- Remove the top of the fill valve.
- Adjust the water level screw until the water reaches the desired level.
How do I troubleshoot a running toilet?
- Check to see if the flapper is leaking.
- Check to see if the fill valve is leaking.
- Adjust the water level in the tank.
How do I troubleshoot a clogged toilet?
- Use a plunger to try to unclog the toilet.
- If the plunger doesn’t work, you may need to use a drain snake.
How do I clean the toilet?
- Use a toilet bowl cleaner to clean the toilet bowl.
- Use a bathroom cleaner to clean the rest of the toilet.
