Installing a Larson storm door is an excellent way to enhance your home’s energy efficiency and curb appeal. It’s a worthwhile investment that can significantly reduce heat loss and increase comfort in your living space. Additionally, a Larson storm door acts as a barrier against harsh weather conditions, such as rain, snow, and strong winds, protecting your primary door from the elements.
The process of installing a Larson storm door isn’t as daunting as it might seem. With careful preparation and the right tools, you can complete the installation in a matter of hours. However, if you’re not comfortable working with tools or dealing with electrical wiring, it’s advisable to hire a professional installer. They have the expertise and experience to ensure a seamless and safe installation.
Before embarking on the installation process, gather the necessary materials, including the storm door, screws, door closer, and any other required hardware. Additionally, ensure you have the proper tools, such as a screwdriver, drill, and measuring tape. Once you have everything you need, you can begin the installation process, starting with making accurate measurements and preparing the door frame for the storm door.
How to Install a Larson Storm Door
Installing a Larson storm door is a relatively easy project that can be completed in a few hours. By following these step-by-step instructions, you can save the cost of hiring a professional and enjoy the benefits of a new storm door.
Materials you will need:
- Larson storm door
- Drill
- Screwdriver
- Level
- Tape measure
- Pencil
Steps:
- Remove the old storm door. If you have an existing storm door, remove it by unscrewing the hinges and lifting it off the frame.
- Install the new storm door frame. Place the new storm door frame over the doorway and align it using the level. Secure the frame to the doorway using the screws provided.
- Hang the storm door. Lift the storm door into the frame and align it. Screw the hinges into the frame to secure the door.
- Adjust the door. Open and close the door to make sure it fits properly. If necessary, adjust the hinges to ensure a smooth operation.
People Also Ask About Installing a Larson Storm Door
What is the best way to measure for a storm door?
To measure for a storm door, measure the width and height of the doorway opening. Add 2 inches to the width and 1 inch to the height to allow for the overlap of the storm door frame.
How do I adjust the hinges on a Larson storm door?
To adjust the hinges on a Larson storm door, use a screwdriver to loosen the screws on the hinge. Move the door to the desired position and tighten the screws to secure the hinge.
How do I replace the glass in a Larson storm door?
To replace the glass in a Larson storm door, remove the storm door from the frame. Lay the storm door flat and carefully remove the old glass by cutting the sealant around the edges. Clean the frame and apply new sealant around the edges of the new glass. Insert the new glass into the frame and secure it with the sealant.
