Tackling the daunting task of replacing the lower engine mounts on a 2017 Buick Encore can be a formidable endeavor, but with meticulous planning and the right tools, it can be achieved. This comprehensive guide will meticulously walk you through the intricacies of this procedure, empowering you to restore the integrity of your vehicle’s engine mounting system and regain a smooth and efficient ride.
To embark on this undertaking, it is imperative to gather the necessary tools, including a floor jack, jack stands, a socket set, a torque wrench, and a pry bar. Once the preparatory phase is complete, the article delves into the intricacies of the procedure, guiding you through each step with precision and clarity. From safely lifting your vehicle and securing it on jack stands to navigating the intricacies of the engine mounts’ removal, you will be expertly equipped to execute the task. Furthermore, the article anticipates potential challenges and provides invaluable troubleshooting tips, ensuring that you remain undeterred throughout the process.
As you progress through the article, you will encounter detailed instructions on how to properly install the new engine mounts, ensuring a secure and durable fit. The article culminates with a comprehensive checklist to help you verify the successful completion of the task. By meticulously following the outlined steps and adhering to the safety precautions, you will not only restore the optimal performance of your Buick Encore’s engine mounting system but also gain the satisfaction of accomplishing a complex automotive repair.
123 How To Change 2017 Buick Encore Lower Engine Mounts
This article will provide a step-by-step guide on how to replace the lower engine mounts on a 2017 Buick Encore. The lower engine mounts are responsible for stabilizing the engine and preventing it from moving excessively during operation. Over time, these mounts can wear out or fail, leading to a variety of symptoms such as engine vibration, noise, or difficulty shifting gears. Replacing the lower engine mounts is a relatively straightforward procedure that can be completed in a few hours with basic tools and knowledge.
Tools Required:
- Socket wrench set
- 15mm socket
- 18mm socket
- 22mm socket
- Flathead screwdriver
- Jack and jack stands
Parts Required:
- Lower engine mounts (2)
Instructions:
1. Park the Encore on a level surface and engage the parking brake. Allow the engine to cool completely.
2. Raise the front of the Encore using a jack and jack stands. Secure the Encore on the jack stands.
3. Locate the lower engine mounts. They are located on either side of the engine, beneath the transmission.
4. Use a 15mm socket to remove the bolts that secure the lower engine mounts to the engine.
5. Use an 18mm socket to remove the bolts that secure the lower engine mounts to the subframe.
6. Carefully remove the lower engine mounts from the vehicle.
7. Install the new lower engine mounts in the reverse order of removal.
8. Torque the bolts to the following specifications:
- Bolts that secure the lower engine mounts to the engine: 35 ft-lbs
- Bolts that secure the lower engine mounts to the subframe: 55 ft-lbs
9. Lower the Encore from the jack stands and remove the jack.
10. Start the engine and check for any unusual noises or vibrations. If the engine is running smoothly and there are no abnormal noises or vibrations, the lower engine mounts have been successfully replaced.
People Also Ask About 123 How To Change 2017 Buick Encore Lower Engine Mounts
What are the symptoms of worn or failed lower engine mounts?
The symptoms of worn or failed lower engine mounts can include:
- Engine vibration
- Noise from the engine compartment
- Difficulty shifting gears
- Excessive movement of the engine during operation
How often should I replace the lower engine mounts?
The lower engine mounts should be replaced as needed. There is no specific mileage or time interval for replacing the lower engine mounts. However, they should be inspected periodically for signs of wear or damage.
How much does it cost to replace the lower engine mounts?
The cost to replace the lower engine mounts will vary depending on the make and model of the vehicle, as well as the location of the repair. However, the average cost to replace the lower engine mounts on a 2017 Buick Encore is between $200 and $400.
