Dorman clamps, also known as constant tension clamps, are designed to provide a secure and reliable hold on hoses, lines, and other components. However, when it comes time to remove these clamps, the task can be frustrating and time-consuming if you don’t have the right tools and techniques. In this comprehensive guide, we will delve into the world of Dorman clamps, exploring various methods to remove them safely and efficiently. Whether you’re a seasoned mechanic or a do-it-yourselfer, this guide will equip you with the knowledge and techniques to tackle this common task with confidence.
The most common type of Dorman clamp is the band clamp. These clamps consist of a stainless steel band, a housing, and a screw. To remove a band clamp, you will need a flathead screwdriver or a pair of pliers. If you are using a screwdriver, insert the tip into the slot on the screw head and turn it counterclockwise. If you are using pliers, grip the screw head and turn it counterclockwise. Once the screw is loosened, you can remove the housing and then slide the band clamp off the hose or line.
Another type of Dorman clamp is the spring clamp. These clamps consist of a spring, a housing, and a latch. To remove a spring clamp, you will need to use a pair of pliers. Grip the latch and pull it towards you. This will release the spring tension, allowing you to remove the housing and then slide the clamp off the hose or line. If the latch is difficult to pull, you can use a pair of needle-nose pliers to grip the spring and pull it back manually. However, be careful not to overextend the spring, as this can damage the clamp.
How To Remove Dorman Clamps
Dorman clamps are a type of hose clamp that is commonly used to secure hoses in automotive applications. They are typically made of steel or stainless steel and have a worm gear mechanism that allows them to be tightened and loosened by turning a screw. Dorman clamps are relatively easy to remove, but there are a few things you need to keep in mind.
First, it is important to choose the right tool for the job. You will need a pair of pliers or a socket wrench with a 7/16-inch socket. If the clamp is particularly tight, you may need to use a pair of locking pliers.
Once you have the right tool, you need to locate the screw that tightens the clamp. The screw is typically located on the side of the clamp, and it has a slot or a hex head. Use the pliers or the socket wrench to turn the screw counterclockwise until the clamp is loose enough to remove.
Once the clamp is loose, you can simply pull it off the hose. Be careful not to damage the hose when you are removing the clamp.
People Also Ask
How do I remove a Dorman Hi-Tork clamp?
Dorman Hi-Tork clamps are a type of Dorman clamp that is designed to withstand high torque. To remove a Dorman Hi-Tork clamp, you will need to use a pair of locking pliers or a socket wrench with a 9/16-inch socket.
Can I reuse a Dorman clamp?
Yes, you can reuse a Dorman clamp, but it is important to inspect the clamp for damage before you reuse it. If the clamp is damaged, it may not be able to secure the hose properly.
