The iconic Pez dispenser, with its diminutive size and beloved candy housed within, has become a staple of childhood and nostalgia. However, for those unfamiliar with the intricacies of its inner workings, loading a Pez dispenser can seem like an insurmountable task. Fear not, fellow Pez enthusiasts! This comprehensive guide will provide you with step-by-step instructions and dispel any lingering uncertainties, ensuring that you can effortlessly replenish your Pez stash with precision and ease.
To embark on this candy-filled adventure, commence by carefully inspecting your Pez dispenser. Note the presence of a small, rectangular opening nestled on the underside of the device. This unassuming portal serves as the gateway to the sweet rewards that await. Next, procure your preferred Pez candy roll, a cylindrical vessel adorned with an array of vibrant colors and tempting flavors. Grip the candy roll firmly and align it precisely with the dispenser’s opening, akin to a seasoned archer aiming for the bullseye.
With a gentle yet determined motion, begin to feed the candy roll into the dispenser’s cavity. As the roll descends, you may encounter a slight resistance, but persevere with patience and unwavering resolve. Meter the pace at which you insert the roll, ensuring that the candy aligns neatly within the dispenser’s internal chambers. Continue this process until the candy roll is fully consumed, leaving only a tantalizing glimpse of the next delectable treat peering from the dispenser’s opening, ready to satisfy your sweet tooth on demand.
Insert a Stack of PEZ Candies
12. Position and Press the Candy Stack
Now, take the stack of PEZ candies and align it with the opening at the back of the dispenser. Make sure the candies are oriented correctly, with the letters or designs facing outward. Gently push the stack into the dispenser, applying moderate pressure until it reaches the bottom.
Once the stack is fully inserted, apply firm pressure with your thumb or other finger on the top candy. This will help secure the candies in place and prevent them from falling out.
| Tips for Inserting the Candy Stack |
|---|
|
Inserting Individual PEZ Candies
If you prefer to dispense PEZ candies individually, you can follow these steps:
- Hold the dispenser upside down with one hand.
- With your other hand, insert a single PEZ candy into the slot at the back of the dispenser, slightly tilted.
- Use your thumb or finger to push the candy down into the dispenser.
- Repeat the process for each subsequent candy, aligning them as you go.
Tips for Dispensing Individual Candies
- Be patient and avoid rushing the process.
- Don’t insert the candies too forcefully or they may break.
- If the candy gets stuck, gently shake the dispenser to dislodge it.
- When the dispenser is full, remove the cap and enjoy your candy!
Calculate the Number of Candies
Determining the number of candies in a PEZ container requires careful consideration of the size of the candies and the volume of the container. Here’s a detailed guide to calculate the approximate number of candies:
1. Measure the Diameter and Height of a Single Candy
Using a ruler or caliper, measure the diameter and height of a single PEZ candy. Record these measurements in millimeters.
2. Calculate the Volume of a Single Candy
The volume of a cylinder, which approximates the shape of a PEZ candy, is given by the formula:
V = πr²h
where:
V is the volume in cubic millimeters
π (pi) is a constant equal to approximately 3.14
r is the radius, half of the diameter
h is the height
Substitute the measured diameter and height into the formula to calculate the volume of a single candy.
3. Determine the Volume of the PEZ Container
Using the same ruler or caliper, measure the length, width, and height of the PEZ container, including the lid. Record these measurements in millimeters.
Calculate the volume of the container using the formula for a rectangular prism:
V = lwh
where:
V is the volume in cubic millimeters
l is the length
w is the width
h is the height
4. Calculate the Theoretical Maximum Number of Candies
Divide the volume of the container by the volume of a single candy to determine the theoretical maximum number of candies that can fit inside the container.
5. Account for Packing Inefficiency
Due to the irregular shape of PEZ candies, they cannot be packed perfectly within the container. To account for this packing inefficiency, multiply the theoretical maximum number of candies by a factor between 0.5 and 0.8.
Example
Consider a PEZ container with the following dimensions:
| Measurement | Value (mm) |
|---|---|
| Candy Diameter | 10 |
| Candy Height | 12 |
| Container Length | 60 |
| Container Width | 30 |
| Container Height | 15 |
1. Volume of a single candy:
V = πr²h
V = 3.14 * (5²) * 12
V = 942 cubic millimeters
2. Volume of the container:
V = lwh
V = 60 * 30 * 15
V = 27,000 cubic millimeters
3. Theoretical maximum number of candies:
Number of candies = Volume of container / Volume of a single candy
Number of candies = 27,000 / 942
Number of candies = 28.65
4. Accounting for packing inefficiency (assuming 70% efficiency):
Actual number of candies = Theoretical maximum number of candies * Packing efficiency
Actual number of candies = 28.65 * 0.7
Actual number of candies ≈ 20
Fill the Dispenser to the Top
A Pez dispenser head is meant to hold twelve Pez candies stacked in a column. But they don’t just drop into place – they have to be stacked and gently pressed into place, one at a time. This is not a quick process, and it requires a little bit of patience. But if you follow these steps, you’ll be able to fill your Pez dispenser to the top in no time.
1. Remove the Lid
The first step is to remove the lid of the Pez dispenser. There is a small tab on the back of the head that you can push in with your fingernail. Once you push in the tab, the lid will pop off. Be careful not to lose the lid, as it is easy to misplace.
2. Fill the Dispenser
Once the lid is removed, you can start filling the dispenser with Pez candies. It is important to fill the dispenser to the top, as this will help to keep the candies from falling out. To fill the dispenser, simply hold the dispenser upside down and pour the Pez candies into the opening. You can use a funnel to help you fill the dispenser more easily.
3. Tamp Down the Candies
Once the dispenser is filled, you need to tamp down the candies so that they are packed tightly together. To do this, use your finger to gently press down on the candies. You may need to press down on the candies several times to get them to pack tightly together.
4. Reattach the Lid
Once the candies are packed tightly together, you can reattach the lid. To do this, simply align the lid with the opening of the dispenser and push down until it clicks into place. Be sure to push down firmly so that the lid is secure.
5. Enjoy Your Pez!
Now that your Pez dispenser is filled, you can enjoy your Pez candies. To dispense a candy, simply push down on the stem of the dispenser. The candy will pop out of the dispenser and into your mouth. Enjoy!
Tips for Filling a Pez Dispenser
Here are a few tips for filling a Pez dispenser:
- Use a funnel to help you fill the dispenser more easily.
- Tamp down the candies so that they are packed tightly together.
- Be sure to push down firmly on the lid so that it is secure.
- If the candies are not packed tightly together, they may fall out of the dispenser.
- If the lid is not secure, the candies may spill out.
Troubleshooting
If you are having trouble filling your Pez dispenser, here are a few troubleshooting tips:
- Make sure that the lid is removed completely.
- Make sure that the dispenser is held upside down when filling.
- Make sure that the candies are tamped down so that they are packed tightly together.
- Make sure that the lid is pushed down firmly so that it is secure.
Table of Pez Candy Colors and Flavors
The following table lists the different colors and flavors of Pez candies:
| Color | Flavor |
|---|---|
| Red | Cherry |
| Orange | Orange |
| Yellow | Lemon |
| Green | Lime |
| Blue | Raspberry |
| Purple | Grape |
| Pink | Strawberry |
How To Load A Pez In English Language
Remove Excess Candies
Once you have inserted the new Pez stem into the dispenser, it is important to remove any excess candies from the dispenser. This will help to prevent the dispenser from jamming or becoming clogged. To remove excess candies, follow these steps:
- Hold the dispenser upside down.
- Shake the dispenser gently.
- Any excess candies will fall out of the dispenser.
- Continue shaking the dispenser until all of the excess candies have been removed.
Once you have removed all of the excess candies, you can now load the dispenser with new candies. To load the dispenser with new candies, follow these steps:
- Hold the dispenser upside down.
- Insert the new candies into the dispenser.
- Continue inserting new candies until the dispenser is full.
- Once the dispenser is full, you can now close the dispenser.
Your Pez dispenser is now loaded and ready to use. Enjoy!
Tips for Removing Excess Candies
Here are a few tips for removing excess candies from your Pez dispenser:
- If you are having trouble removing excess candies, you can try using a toothpick or a paperclip to help dislodge the candies.
- You can also try tapping the dispenser on a hard surface to help dislodge the candies.
- If you are still having trouble removing excess candies, you can try soaking the dispenser in warm water for a few minutes. This will help to loosen the candies and make them easier to remove.
Once you have removed all of the excess candies, you can now load the dispenser with new candies and enjoy your Pez.
Clear a Jammed Candy
If your PEZ dispenser is not dispensing candy properly, it may be jammed. Here are some steps you can take to clear a jammed candy:
1. Inspect the dispenser for any visible obstructions
Look for any candy or debris that may be blocking the candy path. If you see anything, use a toothpick or other small object to carefully remove it.
2. Remove the candy stack
Gently pull the candy stack out of the dispenser. Be careful not to damage the candy or the dispenser.
3. Check the candy for any damage
If the candy is broken or damaged, it may be causing the jam. Discard any damaged candy.
4. Reinsert the candy stack
Carefully reinsert the candy stack into the dispenser. Make sure that the candy is aligned properly and that there are no gaps between the candies.
5. Test the dispenser
Press the dispenser button to see if the candy is dispensing properly. If the candy is still not dispensing, repeat steps 1-4.
6. If the candy is still jammed after following these steps, you may need to disassemble the dispenser
To disassemble the dispenser, remove the bottom cap and then pull the candy stack out of the dispenser. The dispenser should now come apart into two pieces. Use a toothpick or other small object to carefully remove any candy or debris that may be blocking the candy path. Once you have cleared the jam, reassemble the dispenser and test it to make sure that it is working properly.
7. If you are still unable to clear the jam, you may need to contact the manufacturer for assistance
The manufacturer may be able to provide you with additional troubleshooting tips or may need to repair the dispenser.
8. Here are some additional tips for preventing candy jams:
-Store PEZ dispensers in a cool, dry place.
-Do not expose PEZ dispensers to extreme heat or cold.
-Do not drop PEZ dispensers or subject them to rough treatment.
-Use only PEZ candy in PEZ dispensers.
-Do not insert any other objects into the candy path.
-Clean PEZ dispensers regularly.
Check for Broken Dispenser
Before loading your Pez, it’s essential to inspect the dispenser for any potential damage. If the dispenser is cracked, broken, or malfunctioning, it may not operate correctly and could pose a safety hazard.
Visual Inspection
Begin by visually examining the dispenser. Check for any visible cracks or chips in the plastic. Pay attention to the hinge mechanism and ensure it moves smoothly and without resistance. The dispenser should close securely when not in use.
Test the Loading Mechanism
Next, test the loading mechanism. Open the dispenser and insert an empty candy refill packet into the designated slot. The packet should slide in easily and fit snugly without any gaps. If the packet gets stuck or does not insert smoothly, it may indicate a problem with the loading mechanism.
Check the Pez Head
Finally, examine the Pez head on top of the dispenser. Ensure the head is firmly attached to the dispenser and does not wobble or fall off. If the head is loose, it may interfere with the loading process and result in candy spills.
Additional Troubleshooting Tips
If you suspect a broken dispenser, follow these additional troubleshooting tips:
- Check the dispenser for any foreign objects or debris that may be obstructing the loading mechanism.
- Clean the dispenser thoroughly with a mild soap solution and allow it to dry completely before reloading.
- If the dispenser continues to malfunction, contact the manufacturer for further assistance or replacement.
How To Load A Pez
To load a Pez candy dispenser, follow these steps:
- Remove the head of the Pez dispenser.
- Insert a stack of Pez candies into the dispenser, one at a time.
- Replace the head of the dispenser.
- Press down on the head of the dispenser to dispense a Pez candy.
Here are some additional tips for loading a Pez dispenser:
- Do not overfill the dispenser. The candies should be able to move freely inside the dispenser.
- If the candies get stuck, shake the dispenser gently to dislodge them.
- To clean the dispenser, remove the head and wipe it down with a damp cloth.
