How to Style and Cut Long Men's Hair: A Step-by-Step Guide

Harnessing the art of cutting longer men’s hair requires a precise blend of technical skill and aesthetic sensibility. Long hair, unlike its shorter counterparts, presents a unique set of challenges and opportunities. The goal lies in creating a harmonious balance between length, shape, and texture, catering to the individual’s facial features and personal style. This intricate process necessitates a deep understanding of hair structure, growth patterns, and the nuances of layering and blending techniques.

Before embarking on the task, thorough preparation is paramount. The hair should be freshly washed and conditioned, allowing it to be more manageable during the cutting process. The choice of tools is equally crucial – sharp scissors and a comb are indispensable. A mirror, both frontal and at an angle, provides a comprehensive view of the hair from different perspectives. Adequate lighting ensures that every strand is clearly visible, facilitating precise cuts. Once the proper conditions are established, the journey of shaping longer men’s hair can commence.

The initial step involves establishing a foundation by dividing the hair into manageable sections. Parting it from the crown to the nape and creating two equal halves serves as a starting point. This division allows for precise cutting and ensures symmetry. The length of the hair at the nape is often the shortest, gradually increasing towards the crown. Establishing this graduated length provides a solid base for shaping the hair’s silhouette. In the subsequent paragraphs, we will delve into the intricacies of layering and blending techniques, exploring how they contribute to the overall effect of a longer men’s hairstyle.

Removing Bulk with Scissors or Clippers

When it comes to cutting longer men’s hair, removing bulk is essential for creating a manageable, stylish style. Two primary methods for removing bulk are using scissors or clippers.

Using Scissors

Scissors offer precise control over hair removal, allowing you to target specific areas for bulk reduction.

Thinning Shears

Thinning shears are specialized scissors with irregularly spaced teeth that remove hair strands individually. This technique helps reduce hair volume without creating a choppy or uneven appearance.

Hold the hair vertical and use the thinning shears to cut approximately 20% of the hair at each pass. Focus on the areas with the most bulk, such as the crown and sides.

Point Cutting

Point cutting involves cutting the hair at an angle to remove layers and reduce weight. This technique is often used to create a textured, airy effect.

Hold the scissors parallel to the hair and slightly closed. Pull the hair taut and use rapid, perpendicular cuts to remove individual strands.

Using Clippers

Clippers are a faster and more efficient method for removing bulk, but they offer less precision than scissors.

Clipper Guards

Clipper guards are attachments that fit onto the clippers to determine the hair removal length. Choose a guard that corresponds to the desired length of hair reduction.

Start at the back of the head and work your way forward. Hold the clippers against the scalp at a 90-degree angle and move them in overlapping strokes.

Fading

Fading is a technique that creates a gradual transition between different hair lengths. To fade with clippers, use shorter clipper guards at the bottom of the hair and gradually increase the guard length as you move up the head.

Hold the clippers at a lower angle near the scalp and increase the angle as you blend the hair.

Clipper Fade Guide	Length
0 Guard	1/16 inch
1 Guard	1/8 inch
2 Guard	1/4 inch
3 Guard	3/8 inch
4 Guard	1/2 inch
5 Guard	5/8 inch
6 Guard	3/4 inch
7 Guard	7/8 inch
8 Guard	1 inch

Blending and Connecting Sections

Once you have established the outline and foundation for your haircut, it’s time to start blending and connecting the different sections. This is done using shear cutting techniques, which involve using the razor to create a seamless transition between hair lengths. The goal is to achieve a smooth, gradual flow from one section to the next.

Techniques for Blending and Connecting Sections

**Slide Cutting:** This technique involves holding the razor parallel to the section of hair you want to blend. Glide the razor down the hair shaft, using light pressure to create a subtle and gradual transition.
**Point Cutting:** This technique uses the tip of the razor to create a more textured and “feathered” blend. Hold the razor at a 45-degree angle and轻轻

tap it against the hair tips, creating subtle layers that blend together.

**Over-Directing:** This technique involves cutting the hair in the opposite direction of its growth. This creates a softer and more natural-looking blend, as it removes some of the bulk and reduces the visibility of harsh lines.
**Texturizing:** Dry cutting techniques can help add texture and movement to the hair, creating a more dynamic and less monotonous look. Use thinning shears to remove excess weight from the hair and create a more layered effect.
**Using Guides:** Guides can be useful when blending longer hair sections. These tools help you create precise and even transitions, ensuring a seamless and professional-looking finish.
**Consultation and Trial and Error:** The best way to perfect your blending and connecting techniques is through trial and error. Don’t be afraid to experiment with different methods and find what works best for the hair texture and desired style you’re aiming for.
**Blending from Short to Long:** When blending from short to long hair, start by connecting the neckline to the sideburns. Use a slide or point cutting technique to create a soft transition. Gradually increase the length as you move towards the crown, ensuring a seamless flow of hair.
**Blending from Long to Short:** When blending from long to short hair, start at the longest point and gradually reduce the length as you move towards the shorter sections. Use a point or over-directing cutting technique to create a feathered and graduated effect.
**Blending Layers:** Layers can add depth and dimension to longer hair. Use a point cutting technique to create subtle layers that blend seamlessly with the rest of the hair. Adjust the depth and thickness of the layers depending on the desired style.

**Types of Shears:** Different types of shears can be used for blending and connecting hair sections. General purpose shears are versatile and can be used for a variety of cutting techniques. Texturizing shears have fine teeth that remove excess weight and create a layered effect. Thinning shears are designed to remove bulk and add movement to the hair.

Tips for Achieving Seamless Blends

Use sharp, high-quality shears for precise and clean cuts.
Hold the razor at a consistent angle and apply even pressure to create a smooth transition.
Work in small sections and blend gradually, avoiding drastic changes in length.
Use a mirror to check the progress and ensure symmetry and balance.

Don’t overcut, as this can lead to uneven or choppy results.

Cutting Technique	Description
Slide Cutting	Creates a subtle and gradual transition by holding the razor parallel and gliding it down the hair shaft.
Point Cutting	Adds texture and movement by using the tip of the razor to tap against the hair tips, creating subtle layers.
Over-Directing	Reduces bulk and creates a softer blend by cutting the hair in the opposite direction of its growth.
Texturizing	Removes excess weight and creates a layered effect using thinning shears.

Shaping the Bangs

Creating flattering bangs is crucial for any longer men’s hairstyle. Here’s a detailed guide to shaping the bangs:

1. Determine the Desired Bang Style

Consider the overall hairstyle and face shape to choose the right bang style. Long, sweeping bangs suit most face shapes, while shorter, textured bangs can add volume and frame the face.

2. Section Off the Bang Area

Comb the hair forward and use a comb or your fingers to section off the area for the bangs. Typically, the bang area extends from the center of the forehead to the temples.

3. Establish the Length

Decide on the desired length of the bangs. Longer bangs can create a more dramatic look, while shorter bangs can subtly frame the face.

4. Point Cut the Edges

Hold the scissors at a slight angle and point-cut the edges of the bangs to create a feathered, textured look. This technique helps blend the bangs into the rest of the hair.

5. Use a Razor for Precision

For a sharp, defined look, use a razor to trim the bangs. Be careful not to overuse the razor, as it can create a choppy or uneven finish.

6. Consider Layering

Layering the bangs can add volume and movement. Cut shorter layers on the top and longer layers on the bottom to create a stacked effect.

7. Dry Bangs for Styling

After cutting the bangs, dry them completely. This will help you see how they fall naturally and make any necessary adjustments.

8. Style with Product

Use a styling product, such as mousse or pomade, to create the desired hold and texture. Smooth pomade over the bangs for a sleek look, or use mousse to create volume and definition.

9. Maintain the Bangs

Regularly trim the bangs to maintain their shape and length. Avoid washing the bangs too often, as this can remove natural oils and make them appear dull.

10. Advanced Bang Styling Techniques

For a more personalized touch, consider these advanced bang styling techniques:

a. Side-Swept Bangs:

Create a more casual and versatile look by sweeping the bangs to one side. Use a blow dryer to create a slight wave or curl.

b. Textured Bangs:

Add texture and volume to the bangs by using a razor or texturizing shears. This technique creates a choppy, layered effect.

c. Fringe Bangs:

Cut the bangs very short, just above the eyebrows. Fringe bangs create a bold and edgy look that can suit square or oval face shapes.

d. Asymmetry:

Add an element of interest by cutting the bangs asymmetrically. One side can be longer than the other, creating a unique and eye-catching style.

e. Parting:

Create a subtle style variation by parting the bangs down the middle or to one side. This can help frame the face and add a polished touch.

These advanced techniques can help you customize your bang style and create a look that suits your individual preferences and facial features.

Cutting Layers for Volume

Creating layers in longer men’s hair adds significant объем, movement, and style. It’s a technique that works well with hair of all lengths and textures, from thick and curly to fine and straight. Here’s a step-by-step guide to cutting layers for volume:

Step 1: Determine the Desired Length and Volume

Before cutting, decide on the desired overall length and volume. Discuss with the client to determine their desired outcome.

Step 2: Section the Hair Horizontally

Section the hair into two horizontal sections, dividing it into a top and bottom layer. Secure the top layer with a clip to keep it out of the way.

Step 3: Create a Guide Section

Select a small section at the crown of the head as a guide section. This section will determine the length and angle of the layers.

Step 4: Cut the Guide Section at a 90-Degree Angle

Hold the hair vertically and cut the guide section at a 90-degree angle. This creates a straight line that will guide the rest of the layers.

Step 5: Use a Razor or Texturizing Shears

Use a razor or texturizing shears to soften and blend the edges of the guide section. This will add movement and volume.

Step 6: Create Diagonal Partings for Layers

Starting from the guide section, create diagonal partings on each side of the head. These partings will form the basis for the layers.

Step 7: Cut Layers at a 45-Degree Angle

Hold each layer vertically and cut it at a 45-degree angle, following the guide section. This will create longer layers in the front and shorter layers in the back.

Step 8: Use a Stacking Technique for More Volume

Stack the layers by cutting the next layer slightly shorter than the previous one. This creates a pyramid effect that amplifies volume.

Step 9: Check Symmetry and Balance

Compare the layers on each side of the head to ensure symmetry and balance. Make adjustments as needed.

Step 10: Blend and Texturize

Use a razor or texturizing shears to blend and texturize the layers, creating seamless transitions between them.

Step 11: Cutting Layers for Different Hair Types

Hair Type	Tips
Thick, Curly Hair	Cut hair when wet and use a wide-toothed comb to separate curls. Avoid over-layering to maintain volume.
Fine, Straight Hair	Cut hair when dry to avoid stretching and breakage. Use sharp shears and create more layers for maximum volume.
Wavy Hair	Cut hair when slightly damp to define natural waves. Use a razor or thinning shears to remove weight and add texture.

Cutting Around Cowlicks

Cowlicks are areas of hair growth that swirl in a different direction from the rest of the head. They can be frustrating to deal with, but with the right techniques, you can cut around them and achieve a great-looking haircut.

Here are some tips for cutting around cowlicks:

Identify the cowlick. The first step is to identify where the cowlick is located. This can be done by brushing your hair in different directions and seeing which way it naturally falls. Once you’ve found the cowlick, mark it with a comb or clip.
Cut around the cowlick. When you’re cutting around a cowlick, it’s important to follow the natural direction of hair growth. This means that you should cut in the direction that the hair is growing, rather than against it. If you cut against the grain, you’ll create frizz and flyaways.
Use a sharp pair of scissors. A sharp pair of scissors will help you to get a clean, precise cut. Dull scissors will crush the hair shaft, which can lead to split ends and breakage.
Take your time. Don’t try to rush the process of cutting around a cowlick. Take your time and be careful to follow the natural direction of hair growth.
Use a comb or brush to help you. A comb or brush can help you to section the hair and to follow the natural direction of growth. You can also use a comb or brush to help you to smooth out the hair and to create a more even cut.
Be patient. Cutting around a cowlick can take some time and practice. Don’t get discouraged if you don’t get it perfect the first time. Just keep practicing and you’ll eventually get the hang of it.

Here is a table with some additional tips for cutting around cowlicks:

Tip	Description
Use a light touch	When cutting around a cowlick, it’s important to use a light touch. This will help to prevent you from accidentally cutting too much hair.
Cut in small sections	Cutting in small sections will help you to maintain control of the hair and to achieve a more precise cut.
Be careful not to over-cut	It’s easy to over-cut when you’re working with a cowlick. Be careful to cut only the hair that needs to be removed.

Cleaning and Maintaining Haircutting Tools

Professional hair cutters will clean their tools daily, which is a great habit to adopt. But for those who cut hair less frequently, cleaning after each cut will keep them lasting longer and performing better.

Brushes

Removing loose hairs from a hairbrush is best done with a comb. Once most of the hair is removed, rinse the brush under running water. Be sure to hold the brush with the bristles facing down so the water flows in the same direction as the bristles. Once it’s thoroughly rinsed, shake out any excess water and lay it flat to dry with the bristles facing down. Never submerge the whole brush in water, as the glue that holds the bristles in place can loosen.

Scissors

After each use, wipe hair and product buildup off of the blades with a clean towel. For a deeper clean, you can soak the scissors in a cup of warm water with a little bit of dish soap for 10-15 minutes. Rinse thoroughly and wipe dry.

Clippers

The key to keeping clippers lasting longer is to oil the blades after every use. Always use clipper oil, as other types of oil can damage the blades. To clean the clippers, remove the blade and use a small brush to remove any loose hairs. You can also use a can of compressed air to blow out any remaining hairs. Make sure to tighten the blade back on securely before using the clippers again.

Clipper Blade Chart

Blade	Length	Use
#00000	1/16″	Skin Fade, Balding
#0000	1/8″	Skin Fade, Balding
#000	3/32″	Skin Fade, Balding
#00	1/16″	Buzz Cut, Short
#1	3/16″	Short
#2	1/4″	Short
#3	3/8″	Medium
#4	1/2″	Medium
#5	5/8″	Medium
#6	3/4″	Long
#7	7/8″	Long
#8	1″	Long

Razors

After each use, rinse the razor under hot water and shake out any excess water. Never wipe the blade with a towel, as this can dull the blade. If you notice any buildup on the blade, you can clean it with a cotton swab dipped in rubbing alcohol.

Proper Haircutting Sanitation

Maintaining a clean and sanitary work environment is essential in hairdressing, not only for the client’s health and safety but also for the hairstylist’s well-being. Here are some important guidelines for proper haircutting sanitation:

Wash your hands

before and after each client.
Sanitize your tools

regularly, including scissors, combs, and brushes. This can be done by wiping them down with a disinfectant or soaking them in a solution of water and bleach.
Wear gloves

when cutting hair, especially if you have any open cuts or sores on your hands.
Clean the work surface

before and after each client. This can be done with a disinfectant or a simple solution of soap and water.
Dispose of hair clippings

properly. Hair clippings can harbor bacteria and viruses, so it’s important to dispose of them in a sealed bag.
Wear a mask

when cutting hair, especially if you have a cold or other respiratory infection.
Ventilate the work area

to prevent the buildup of fumes and dust.

35. Disinfecting Hair Tools

Disinfecting hair tools is an essential part of maintaining a sanitary work environment. There are various methods for disinfecting hair tools, each with its pros and cons. Here are some common methods:

a. Using a Disinfectant Spray

Disinfectant sprays are readily available in the market and can be used to disinfect hair tools quickly and easily. Simply spray the disinfectant onto the tool and wipe it clean with a cloth.

Pros: Convenient, quick, and easy to use.

Cons: May leave behind a strong odor, can be harsh on tools.

b. Soaking in a Disinfectant Solution

Soaking hair tools in a disinfectant solution is another effective method of disinfection. Prepare a solution of water and bleach (1:10 ratio) or use a commercially available disinfectant solution. Submerge the tools in the solution for the recommended amount of time (usually 10-15 minutes).

Pros: Thorough disinfection, kills bacteria and viruses.

Cons: Can be time-consuming, may damage tools if soaked for too long.

c. Using a UV Sterilizer

UV sterilizers use ultraviolet light to kill bacteria and viruses. Simply place the hair tools in the sterilizer and turn it on. The UV light will disinfect the tools within a few minutes.

Pros: Quick and effective, no harsh chemicals involved.

Cons: Can be expensive, may not be suitable for all types of hair tools.

d. Using Heat

Heat can also be used to disinfect hair tools. Place the tools in an oven preheated to 250°F (121°C) and bake for 30 minutes. This will kill most bacteria and viruses.

Pros: Effective and inexpensive.

Cons: May damage delicate tools, not suitable for all types of materials.

e. Autoclaving

Autoclaving is the most thorough method of disinfection. It uses a combination of heat and pressure to kill all microorganisms, including bacteria, viruses, and spores. Hair tools must be placed in an autoclave bag and subjected to a specific cycle (e.g., 121°C for 15 minutes).

Pros: Most effective method of disinfection.

Cons: Requires specialized equipment, can be expensive.

The choice of disinfection method depends on the specific type of hair tools and the available resources. It is important to follow the manufacturer’s instructions for disinfection to ensure the safety and effectiveness of the process.

Achieving a Natural-Looking Cut

To achieve a natural-looking cut on longer men’s hair, consider the following techniques:

Sectioning the Hair

– Begin by dampening the hair to make it easier to work with.
– Section the hair into four quadrants: two at the front (one on each side of the forehead) and two at the back (one on each side of the crown).
– Secure each section with a hair clip or elastic band.

Cutting the Hair

– Start by cutting the hair at the back of the head.
– Use sharp, clean shears and cut in small, even strokes.
– Hold the shears parallel to the head and follow the natural curve of the skull.
– Cut the hair to the desired length, keeping in mind that you can always cut more off but you can’t add it back on.

Blending the Hair

– Once you have cut the back of the head, release the hair from one of the front sections and blend it with the back.
– To blend, hold the front hair over the back hair and cut at a slight angle.
– This will create a smooth transition between the two lengths.
– Repeat this process with the other front section.

Texturizing the Hair

– To add texture and movement to the hair, use thinning shears or a razor comb.
– Thinning shears remove small sections of hair, which creates a lighter, more textured look.
– A razor comb has small blades that cut the hair when it is combed through, creating a similar effect to thinning shears.
– Use texturizing techniques sparingly, as over-texturizing can make the hair look thin and choppy.

Finishing Touches

– Once you have cut and blended the hair, check for any uneven spots.
– Use a clipper or trimmer to clean up any stray hairs around the ears and neckline.
– Apply a small amount of styling product to the hair to define and shape it.

Tips for Cutting Longer Men’s Hair

– Use sharp, clean shears. Dull shears will crush the hair and make it look uneven.
– Cut the hair in small, even strokes. This will help you to achieve a precise cut.
– Hold the shears parallel to the head and follow the natural curve of the skull. This will help you to create a natural-looking cut.
– Cut the hair to the desired length, keeping in mind that you can always cut more off but you can’t add it back on.
– Blend the hair by holding the front hair over the back hair and cutting at a slight angle. This will create a smooth transition between the two lengths.
– Texturize the hair by using thinning shears or a razor comb. This will add movement and interest to the hair.
– Use a clipper or trimmer to clean up any stray hairs around the ears and neckline.
– Apply a small amount of styling product to the hair to define and shape it.

If you are not confident cutting your own hair, it is always best to consult with a professional barber or stylist.

Safety Precautions When Cutting Hair

Safety should always be the top priority when cutting hair, especially when working with long men’s hair. Follow these precautions to ensure a safe and successful haircut:

1. Use Sharp Shears or Clippers:

Dull blades can tug at hair, causing discomfort and damage. Ensure your shears or clippers are sharp and well-maintained.

2. Section the Hair:

Before cutting, section the hair into smaller, manageable portions. This allows for more precise cuts and prevents overcutting.

3. Consult with the Client:

Discuss the desired length, style, and any concerns with the client before starting. Ensure they are clear on the expected outcome.

4. Hold the Scissors/Clippers Correctly:

Hold the scissors parallel to the hair shaft, with the blades facing away from you. Grip the clippers securely and hold them in a comfortable position.

5. Cut in Small Sections:

Avoid cutting large chunks of hair at once. Take small, gradual sections to achieve a more even and controlled result.

6. Follow the Hair’s Natural Growth:

Cut with the grain of the hair, which means following the direction of its natural growth. This prevents split ends and damage.

7. Avoid Overcombing:

Combing the hair too often can create tension and weaken the hair strands. Comb only when necessary, and use a wide-toothed comb.

8. Protect Clothing and Surroundings:

Cover the client’s clothing with a cape or towel to protect them from hair clippings. Also, place a towel or newspaper on the floor to catch any falling hair.

9. Take Breaks:

If the haircut is lengthy, take short breaks to prevent fatigue and maintain precision.

10. Use a Magnifying Glass if Needed:

For precise trimming, especially around the ears or neckline, consider using a magnifying glass to ensure accuracy.

Troubleshooting Common Haircutting Problems

47. Using Incorrect Cutting Techniques

Incorrect cutting techniques can lead to uneven cuts, choppy layers, or blunt ends. Here are some common errors to avoid:

a. Overcutting

Cutting too much hair at once can result in drastic length loss or uneven sections. Hold the scissors at a slight angle and snip small sections at a time, gradually removing the desired amount.

b. Jagged Cuts

Shaky hands or dull scissors can create jagged edges. Hold the scissors steady and use sharp blades to ensure clean, precise cuts.

c. Blunt Ends

Cutting straight across the ends of the hair can result in blunt or “blocky” sections. To create more natural-looking ends, use point cutting techniques by holding the scissors at an angle and snipping into the ends.

d. Uneven Layers

Uneven layers can occur when the hair is not sectioned properly or when the hair is cut at different angles within the same layer. Ensure that the hair is evenly distributed within the sections and cut at a consistent angle throughout the layer.

e. Overblending

Overblending layers can remove too much weight and volume, creating a flat or “mushy” look. Be conservative in your blending strokes and only blend where necessary to create a smooth transition.

f. Incorrect Sectioning

Improper sectioning can lead to uneven cuts or difficulty in styling. Use clips or hair ties to clearly define each section and cut within the designated areas.

g. Cutting Over Comb

Cutting over a comb can remove too much length and create harsh lines. Instead, use a razor comb or scissors to bulk-remove unwanted hair and then fine-tune the shape using freehand techniques.

h. Not Pointing Scissors Away From Scalp

When cutting near the scalp, make sure to point the scissors away from the skin to avoid cutting the skin accidentally.

Section B: Mastering Haircutting Techniques

48. Blending and Fading Techniques for Men’s Long Hair

Blending and fading techniques seamlessly transition from shorter to longer hair lengths, creating a natural and stylish look for men’s long hairstyles. Here’s a comprehensive guide to mastering these techniques:

Scissors-Over-Comb Fading

Hold the comb teeth upright and parallel to the hair growth direction at the desired blending area. Position the scissors over the comb, keeping them slightly elevated. Slowly run the scissors over the comb while gradually lowering them towards the longer hair section. This technique creates a smooth transition from short to long.

Clipper-Over-Comb Fading

Similar to scissors-over-comb fading, hold the comb teeth upright and parallel to the hair growth at the blending area. Position the clipper over the comb, ensuring the teeth extend beyond the clipper’s blade. Gradually lower the clippers towards the longer hair section, creating a natural fade.

Tapering

Tapering involves gradually reducing hair length from the top of the head towards the neck and sides. Use clippers or scissors to create a smooth transition, gradually increasing the guard size or cutting length as you move down the hair.

Shear-Over-Razor Fading

This advanced technique involves using a razor to create a very close fade while maintaining a gradual transition. Wet the hair and work with small sections. Use clippers to create a shorter base layer, then hold a razor parallel to the scalp and lightly glide it over the hair, fading it into the longer section.

Back-Shaping

Back-shaping adds definition and texture to the back of the head. Use thinning shears or a razor to remove excess weight and create a tapered or layered effect. This technique enhances the overall look of long hairstyles, particularly when tied in a ponytail or bun.

Blending Technique	Description
Scissors-Over-Comb Fading	Smooth transition from shorter to longer hair using scissors over a comb.
Clipper-Over-Comb Fading	Natural fade using clippers over a comb.
Tapering	Gradually reducing hair length towards the neck and sides.
Shear-Over-Razor Fading	Advanced technique for a close fade with a gradual transition, using shears and a razor.
Back-Shaping	Adding definition and texture to the back of the head using thinning shears or a razor.

How To Cut Longer Mens Hair

Cutting longer men’s hair can be a daunting task, but it’s definitely doable with the right tools and techniques. Here’s a step-by-step guide to help you get started:

Wash and condition your hair. This will help to remove any dirt or product buildup and make your hair more manageable.
Comb your hair. This will help to detangle your hair and make it easier to cut.
Decide how much length you want to cut off. If you’re unsure, start with a small amount and you can always cut more off later.
Section your hair. This will help you to control the cutting process and avoid cutting too much off. Section your hair into four sections: two in the front and two in the back.
Start cutting. Use sharp scissors and cut in small, even strokes. Follow the natural shape of your head and avoid cutting too much off at once.
Check your work. Once you’ve finished cutting, check your work in a mirror. Make sure that the length is even and that there are no uneven spots.
Style your hair. Once you’re happy with the length and shape of your hair, style it as desired.